Spiral Band Cylindrical Rubber Drum Holder, 2-3/8" x 1-1/8, 1/4" Shank

Contact Us +1 (800) 342-9015 info.us@pferd.com

Technical information

Spiral Band Cylindrical Rubber Drum Holder, 2-3/8" x 1-1/8, 1/4" Shank

Item number Global part number: 47601147
Dia. external: 2 3/8 Inch
Dia. shank: 1/4 Inch
EDP no.: 41997
Height: 2 3/8 Inch
Length, shank: 1 1/4 Inch
Max. RPM: 9500 RPM
PFERD type: GK 6030
Version: No information
Width: 1 1/6 Inch
Packaging unit: 5 pieces

Description

Compatible holder for cylindrical abrasive spiral bands.

In ISO 15637-1, cylindrical rubber drum holders are designated as "holding fixtures of cylindrical abrasive sleeves".

Advantages

Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.
Outstanding service life even under the toughest work conditions, due to special manufacturing.
Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.

Recommendations for use

To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.
To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.
For best performance, use at a recommended peripheral speed of 4,000-6,000 SFPM.

Safety notes

The maximum permitted peripheral speed is 6,000 SFPM.

Compatible power tools: Flexible shaft drive; Straight grinder

Downloads

Address:: PFERD INC.
9201 W. Heather Ave.
Milwaukee, WI 53224
: +1 (800) 342-9015
: +1 (262) 255–2840
: info.us@pferd.com

Contact us