COMBIDISC® Abrasive Disc, 3" Dia, Type CD, 50 Grit, Zirconia alumina

Technical information

Description

For universal coarse grinding with high stock removal and long service life.

Advantages

Recommendations for use

Use COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Use with hard or medium-hard COMBIDISC® abrasive disc holders.

Ordering notes

Safety notes

The maximum permitted peripheral speed is 9,800 SFPM.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Workpiece materials: Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Titanium

Applications: Deburring; Leveling; Roughening; Sharpening; Step-by-step fine grinding; Surface work; Working on edges; Work on weld seams

Compatible power tools: Angle grinder; Cordless angle grinder; Flexible shaft drive; Straight grinder

PFERDVALUE

recommends COMBIDISC® products to reduce disc change and setup times.

recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.

Downloads

COMBIDISC abrasive discs CD/CDR