Carbide Bur SL-3L6 14° Taper Double Cut 3/8" x 1-1/16" x 1/4" Shank

Technical information

Item number Global part number: 21726222
Angle: 14 °
Cut: Double
Dia. external: 3/8 Inch
Dia. shank: 1/4 Inch
EDP number: 26222
Length, cut: 1 1/16 Inch
Length, shank: 6 Inch
Overall length: 7 1/8 Inch
RPM from, grey cast iron, white cast iron: 4000 RPM
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 4000 RPM
RPM from, high-temperature-resistant materials: 4000 RPM
RPM from, rust and acid-resistant steels: 4000 RPM
RPM from, steels up to 370 HV (38 HRC): 4000 RPM
RPM to, grey cast iron, white cast iron: 9000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 9000 RPM
RPM to, high-temperature-resistant materials: 9000 RPM
RPM to, rust and acid-resistant steels: 9000 RPM
RPM to, steels up to 370 HV (38 HRC): 9000 RPM
Radius: 0.114 Inch
SCTI-No.: SL-3L6
Packaging unit: 1 piece

Description

Double cut burs are cross cut and ideal for machining cast iron, steel, stainless steel (INOX), nickel-based alloys, and titanium alloys. These burs have a high stock removal rate.

Universal line burs are designed for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

14° Taper bur with round radius end, shape L.

Advantages

Good stock removal rate due to high quality tungsten carbide, bur shape, cut, and optional coating.
Durable.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
High surface quality.

Recommendations for use

The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Safety notes

For safety reasons, the maximum application speeds with contact with the workpiece require a reduction in the recommended speed of tungsten carbide burs with standard shanks. Observe the reduced speeds outlined in the product details.
When working with longer shanks, it is crucial that the bur is in contact with the workpiece (or inserted in the hole or slot to be machined) before the power tool is turned on. As a rule, the bur must remain in contact with the workpiece for as long as the machine is running. Failure to observe this procedure may result in shank failure (bending) and hence an increased risk of accidents. If continuous contact between the tool and the workpiece is not guaranteed during use, the maximum idling speeds must not be exceeded.
Not designed for robotic or stationary applications due to risk of bending. Use only rigid clamping systems/power tools.

Workpiece materials: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Compatible power tools: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burs for versatile use, Double cut, 14° Taper bur with radius end – Shape L

Carbide Bur SL-3L6 14° Taper Double Cut 3/8" x 1-1/16" x 1/4" Shank

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later