Bevel brushes crimped, encapsulated shank-mounted

Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank

EDP:: 83602

Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank 2

Technical data

Distributors-Search

Technical information

Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank

Item number Global part number: 79183602
Dia. external: 2 Inch
Dia. filament material: .020 Inch
Dia. shank: 1/4 Inch
ECAP® grade: E3
EDP no.: 83602
Filament material: Steel wire (ST)
Max. RPM: 17000 RPM
Mounting system: Shank
Overall length: 2-3/4
RPM, optimum, from: 8500 RPM
RPM, optimum, to: 12700 RPM
Trim length: 7/16 Inch
Width: 1/4 Inch
Packaging unit: 10 pieces

Description

Extremely aggressive brushing action, ideal for heavy-duty brushing.

Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility.

Brushes with encapsulated steel wire are available in different hardness grades.

Advantages

Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.
Maximum service life as premature wire breakage is prevented.
Precise handling due to high dimensional stability.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads

Bevel brushes crimped, encapsulated shank-mounted

Encapsulated Crimped Wire Wheel Brush 2" Dia. .020 Carbon Steel 1/4" Shank

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later