Bevel brushes crimped INOX-TOTAL, shank-mounted

INOX-TOTAL Crimped Wire Bevel Brush 2-3/4" Dia. .010 SS 1/4" Shank

EDP:: 82745

INOX-TOTAL Crimped Wire Bevel Brush 2-3/4" Dia. .010 SS 1/4" Shank 2

Technical data

Distributors-Search

Technical information

INOX-TOTAL Crimped Wire Bevel Brush 2-3/4" Dia. .010 SS 1/4" Shank

Item number Global part number: 79182745
Dia. external: 2-3/4 Inch
Dia. filament material: .008 Inch
Dia. shank: 1/4 Inch
EDP no.: 82745
Filament material: Stainless steel wire (INOX)
Max. RPM: 12000 RPM
Mounting system: Shank
Overall length: 5/8 Inch
RPM, optimum, from: 6000 RPM
RPM, optimum, to: 9000 RPM
Trim length: 5/8 Inch
Width: 3/8 Inch
Packaging unit: 10 pieces

Description

Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discoloration.

In addition to brushes with a stainless steel filament, PFERD also offers brushes of the INOX-TOTAL type for work on stainless steel (INOX). It is particularly well suited to use in critical environments.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.
Highly flexible, enabling optimal adaptation to the workpiece contour.
Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A).
Very corrosion-resistant.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads

Bevel brushes crimped INOX-TOTAL, shank-mounted

INOX-TOTAL Crimped Wire Bevel Brush 2-3/4" Dia. .010 SS 1/4" Shank

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later