Casing SCH 7 PST-T DIN 10/M5

Flexible shaft 4/7 PST-T, replaceable casing, M5 fastening thread end

EDP:: 94857

Technical data

Distributors-Search

Technical information

Flexible shaft 4/7 PST-T, replaceable casing, M5 fastening thread end

Item number Global part number: 87101806
Dia. drive-side coupling: 1.18 Inch
Dia. external: 0.71
EDP no.: 94857
Height: 0.71 Inch
Length: 80
Net weight: 0.871 kg
PFERD type: SCH 7 PST-T DIN 10/M5 2 m
Width: 0.71 Inch
Packaging unit: 1 piece

Description

These special flexible shafts do not have a handpiece for mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX® cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.

The PST-T flexible shaft is designed for grinding the insides of pipes.

Recommendations for use

Flexible shaft motors with stepless rotational speed regulation are recommended as tool drives.
Before inserting the POLISTAR-TUBE and shaft into the pipe, preform and adjust to fit the pipe diameter.
Reduce the rotational speed of the product during insertion.
For pipes with more than three bends, it is best to grind from both ends if possible.
When the product emerges from the pipe end, it can be pulled back while still in rotation. The rear of the POLISTAR-TUBE deburrs the pipe end and also grinds the inside of the pipe during the backward movement.
All flexible shaft drives a speed range of 7,650–1,500 RPM and flexible shaft connection DIN 10 can be used.

Ordering notes

Special lengths available on request.

Safety notes

Observe the recommended and maximum permitted rotational speeds of the products for the rotational speed setting of the motor.

Downloads

Casing SCH 7 PST-T DIN 10/M5

Flexible shaft 4/7 PST-T, replaceable casing, M5 fastening thread end

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later