COMBIDISC felt discs CD/CDR

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing

EDP:: 43213

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing 2

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing 3

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing 4

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing 5

Technical data Change variant

Distributors-Search

Choose options

Clamping system

CDR system CD system

Dia. external

2 Inch 3 Inch

Reset Filter

Matching accessories & spare parts

Polishing paste DPP ECO 1-10

Polishing paste DPP ECO 3-10

Polishing paste DPP ECO 7-10

Polishing paste DPP ECO 10-10

Polishing paste DPP ECO 15-10

Polishing paste DPP ECO 30-10

Polishing paste G-PP 1 VP STEELOX

Polishing paste G-PP 2 VP ALU

Polishing paste G-PP 3 VP NON-FERROUS

Polishing paste G-PP 4 HGP UNIVERSAL

Polishing paste G-PP 5 HGP PLAST

Polishing paste K-PP 1 VP STEELOX

Polishing paste K-PP 2 VP ALU

Polishing paste K-PP 3 VP NON-FERROUS

Polishing paste K-PP 4 HGP UNIVERSAL

Polishing paste K-PP 5 HGP PLAST

Technical information

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing

Item number Global part number: 42003050
Clamping system: CDR system
Dia. external: 2 Inch
EDP no.: 43213
RPM, optimum, from: 2000 RPM
RPM, optimum, to: 4000 RPM
Packaging unit: 10 pieces

Description

Designed for polishing with polishing paste bars, grinding pastes, or diamond polishing pastes in face-down grinding on small and medium-sized surfaces.

Advantages

Reduced down time due to quick changes.
Convenient to use due to simple handling and low-vibration working.
No operational disruptions caused by sticking, slipping, or disengaging.

Recommendations for use

Use COMBIDISC® felt discs with a abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
When applying a different polishing paste, use a new unused felt disc.
For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.

Ordering notes

Please order arbor separately.

Safety notes

The maximum permitted peripheral speed is 9,800 SFPM.

Workpiece materials: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Polishing

Compatible power tools: Angle grinder; Cordless angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends COMBIDISC® products to reduce disc change and setup times.

PFERDERGONOMICS

recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.

Downloads

COMBIDISC felt discs CD/CDR

COMBIDISC® Felt Disc, 2" Dia, Type CDR, Polishing

Matching accessories & spare parts

PFERDEFFICIENCY

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later