COMBIDISC non-woven discs VRW CD/CDR

COMBIDISC® Non-Woven Abrasive Disc, 2" Dia, Type CD,180 Grit,Aluminum oxide,Soft

EDP:: 43201

COMBIDISC® Non-Woven Abrasive Disc, 2" Dia, Type CD,180 Grit,Aluminum oxide,Soft 2

COMBIDISC® Non-Woven Abrasive Disc, 2" Dia, Type CD,180 Grit,Aluminum oxide,Soft 3

COMBIDISC® Non-Woven Abrasive Disc, 2" Dia, Type CD,180 Grit,Aluminum oxide,Soft 4

Technical data Change variant

Distributors-Search

Choose options

Clamping system

CDR system CD system

Dia. external

2 Inch 3 Inch

Grit size

100 180 280

Reset Filter

Technical information

COMBIDISC® Non-Woven Abrasive Disc, 2" Dia, Type CD,180 Grit,Aluminum oxide,Soft

Item number Global part number: 42760503
Abrasive: Aluminum oxide A
Clamping system: CD system
Dia. external: 2 Inch
EDP no.: 43201
Grit size: 180
RPM, optimum, from: 5500 RPM
RPM, optimum, to: 7500 RPM
Version: fine
Packaging unit: 50 pieces

Description

Designed for very fine grinding on small and medium-sized surfaces and contours, and for cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.

Advantages

Reduced down time due to quick changes.
Convenient to use due to simple handling and low-vibration working.
No operational disruptions caused by sticking, slipping, or disengaging.

Recommendations for use

Use COMBIDISC® non-woven discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Adding oil or water during grinding results in a finer finish, cooler grinding, and longer service life.

Ordering notes

Please order the COMBIDISC® backing pad separately.

Safety notes

The maximum permitted peripheral speed is 9,800 SFPM.

Workpiece materials: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams

Compatible power tools: Angle grinder; Cordless angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends COMBIDISC® products to reduce disc change and setup times.

PFERDERGONOMICS

recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.

Downloads

COMBIDISC non-woven discs VRW CD/CDR

COMBIDISC® Non-Woven Abrasive Disc, 2" Dia, Type CD,180 Grit,Aluminum oxide,Soft

PFERDEFFICIENCY

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later