Cup brush, crimped, universal, for straight grinders, shank-mounted

M-BRAD® Cup Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank

EDP:: 763834

M-BRAD® Cup Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank 2

M-BRAD® Cup Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank 3

Technical data Change variant

Distributors-Search

Choose options

Dia. external

2 Inch 3 Inch

Dia. filament material

.012 Inch .040 Inch

Filament material

Silicon carbide (SiC) Steel wire (ST)

Reset Filter

Technical information

M-BRAD® Cup Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank

Item number Global part number: 43740001
Dia. external: 3 Inch
Dia. filament material: .040 Inch
Dia. shank: 1/4 Inch
EDP no.: 763834
Filament material: Silicon carbide (SiC)
Grit size: 120
Max. RPM: 4500 RPM
Mounting system: Shank
Packaging: POS packaging
RPM, optimum, from: 1500 RPM
RPM, optimum, to: 4500 RPM
Trim length: 3/4 Inch
Packaging unit: 5 pieces

Description

Designed for cleaning, derusting and smoothing. Perfect tool for the removal of corrosion and paint. Ideal for brushing on large, flat and easily accessible surfaces with the entire brush face applied to the workpiece.

Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement.

Plastic filaments are temperature-resistant up to 410°F.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Packaged for retail.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.
Use coolant for applications where large amounts of heat are produced.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Aluminum; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads

Cup brush, crimped, universal, for straight grinders, shank-mounted

M-BRAD® Cup Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later