High-performance tungsten carbide bur set, MICRO cut

Carbide Bur Set 3 Piece MICRO Cut 1/8″ Shank Plastic Case

EDP:: 27550

Carbide Bur Set 3 Piece MICRO Cut 1/8″ Shank Plastic Case 2

Technical data

Find a distributor

Technical information

Carbide Bur Set 3 Piece MICRO Cut 1/8″ Shank Plastic Case

Item number Global part number: 21827550
Cut: MICRO
Dia. shank: 1/8 Inch
Dia. shank: 3 mm
EDP no.: 27550
PFERD TOOLS type: SET 3-TLG MICRO CUT PoA
Packaging unit: 1 piece

Description

MICRO cut tungsten carbide burs are specifically designed for finishing and are used in areas where mounted points are often used. They offer a higher stock removal rate and produce a high surface quality, particularly when compared to conventional double cut burs. MICRO cut burs also operate with low vibration and little noise, they maintain their geometry over their entire service life, and they work in both manual and machine applications. MICRO cut burs can machine almost all materials up to a hardness of 940 HV (68 HRC).

Advantages

High surface quality.
In comparison to abrasive mounted points, there is no change in geometry due to wear and tear.
Work on almost all materials up to 940 HV (68 HRC).
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Ideal for finishing, very fine cleaning work, corrections in tool and mold construction, and for sharpening cutting tools.
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.

Workpiece materials: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling; Surface work; Work on weld seams

Compatible power tools: Automated centers; Flexible shaft drive; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends MICRO cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERD TOOLS ERGONOMICS

recommends MICRO cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

High-performance tungsten carbide bur set, MICRO cut

Carbide Bur Set 3 Piece MICRO Cut 1/8″ Shank Plastic Case

PFERD TOOLS EFFICIENCY

PFERD TOOLS ERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later