1-1/2" Bi-Metal Hole Saw

Technical information

1-1/2" Bi-Metal Hole Saw

Item number Global part number: 25101138
Cutting depth, max: 1-7/16 Inch
Dia. external: 1-1/2 Inch
EDP no.: 29115
RPM from, rust and acid-resistant steels: 115 RPM
RPM from, soft non-ferrous metals: 300 RPM
RPM from, steels up to 370 HV (38 HRC): 230 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 370 RPM
Packaging unit: 1 piece

Description

Hole saws are made from tough, shatter-proof, sturdy HSS bi-metal. The saw teeth are made from high-quality M42 material. They are used for cutting out holes.

The arbor with a 5/18-18 thread is part number 29034.

Advantages

Cost-effective sawing of round cut-outs.
Alternating tooth pitch prevents chattering during sawing.
High concentricity.
Good chip removal.
The hole saw is conveniently centered and guided via the replaceable bi-metal pilot drill.
Hole saw arbor comes with an ejection spring for improved ejection of the cut material.

Recommendations for use

Observe the recommended rotational speed.
Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 1/8" over the teeth of the hole saw."
When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
Bi-metal hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles that develop from the workpiece during work. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
Avoid overheating the saw.
Observe the maximum cutting depth.

Ordering notes

Please order hole saw arbors separately.

Safety notes

When using shank extensions, the recommended hole saw rotational speed must not be exceeded in order to prevent accidents.

Workpiece materials: Aluminum; Brass; Bronze; Chipboard; Copper; Hard non-ferrous metal; Hardwood; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tough aluminium alloys; Wood; Zinc

Applications: Cutting out holes; Drilling

Compatible power tools: Column drill; Power drill

Downloads

HSS hole saws thread version 5/8-18 UNF

1-1/2" Bi-Metal Hole Saw

Matching accessories & spare parts

Included in

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later