HSS Twist Drill 5/32" M2 STEEL

Technical information

HSS Twist Drill 5/32" M2 STEEL

Item number Global part number: 25204009
Angle: 118 °
Diameter: 5/32 Inch
EDP no.: 20009
Flute length: 2 Inch
Overall length: 3-1/9 Inch
RPM from, grey cast iron, white cast iron: 800 RPM
RPM from, hard non-ferrous metals: 2000 RPM
RPM from, soft non-ferrous metals: 2390 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 1200 RPM
RPM to, grey cast iron, white cast iron: 2000 RPM
RPM to, hard non-ferrous metals: 3990 RPM
RPM to, soft non-ferrous metals: 4780 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 3190 RPM
Version: STEEL
Packaging unit: 10 pieces

Description

Drill bits with cross grinding for industrial use. Fully ground, right-hand turning to produce precise drill holes due to their high concentricity and exact centering. PFERD offers spiral drills STEEL (118 ° point angle) and INOX (135 ° point angle) versions.

High-performance HSSG (M2) drill bit for industrial use on STEEL. The fully ground right-hand turning design with cross grinding provides an exact centering drill tip and a high level of concentricity.

Advantages

Very good chip removal.
High concentricity.
Exact centering and low feed force thanks to cross grinding.
Designed for universal use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminum.
Easy centering.
Durable.

Recommendations for use

Observe the recommended rotational speed.
When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
To avoid corrosion when working on stainless steel (INOX), remove any particles that break away from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).

Safety notes

Wear eye protection.
Follow the safety instructions.

Workpiece materials: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Casting scale; Casting scale with sand contamination and metal contamination; Cast iron; Cast steel; Chipboard; Copper; Ductile cast iron; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Roller-bearing and ball-bearing steels; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Drilling

Compatible power tools: Column drill; Power drill; Robot; Stationary machines; Tool machine

Downloads

HSS twist drill bits, HSSG

HSS Twist Drill 5/32" M2 STEEL

Included in

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later