POLIFLAP® Abrasive Flaps, 2-3/8" x 3, 100 Grit, Set of 12 Flaps, Aluminum oxide

Technical information

Description

The POLIFLAP® system is ideal for blending and restoring surface textures, fine grinding of radii, contours, curved areas, and large surfaces.

Abrasive flaps designed for POLIFLAP® grinding wheels, used to create a range of visual effects from coarse to very fine.

Advantages

Ordering notes

Safety notes

The maximum permitted peripheral speed is 6,300 SFPM.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Workpiece materials: Aluminum; Annealed cast iron; Brass; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Deburring; Leveling; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams

PFERDVALUE

recommends POLIFLAP® products to reduce vibration and noise produced during use and to improve comfort when working.

Downloads

POLIFLAP® flaps