POLINOX discs PNER

POLINOX® Unitized Disc, 5" x 1/2 x 7/8, T27, Fine, Soft, 2SF,Silicon carbide

EDP:: 48480

POLINOX® Unitized Disc, 5" x 1/2 x 7/8, T27, Fine, Soft, 2SF,Silicon carbide 2

POLINOX® Unitized Disc, 5" x 1/2 x 7/8, T27, Fine, Soft, 2SF,Silicon carbide 3

POLINOX® Unitized Disc, 5" x 1/2 x 7/8, T27, Fine, Soft, 2SF,Silicon carbide 4

Technical data Change variant

Distributors-Search

Choose options

Dia. external

4-1/2 Inch 5 Inch

Dia. hole

7/8 Inch Hub Inch

Version

MH (medium-hard) MW (medium-soft) W (soft)

Reset Filter

Technical information

POLINOX® Unitized Disc, 5" x 1/2 x 7/8, T27, Fine, Soft, 2SF,Silicon carbide

Item number Global part number: 44690733
Abrasive: Silicon carbide SiC
Dia. external: 5 Inch
Dia. hole: 7/8 Inch
EDP no.: 48480
Grit size: fine
Max. RPM: 10000 RPM
RPM, optimum: 5400 RPM
Specification: 2SF
Version: W (soft)
Width: 1/2 Inch
Packaging unit: 5 pieces

Description

POLINOX® unitized discs are used for face-down grinding with variable speed angle grinders. Ideal for larger surfaces. The compressed, non-woven material is bonded to a fiberglass back.

POLINOX® unitized discs are made of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain, and the appropriate bond create non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.

Advantages

Cost-effective due to high abrasive performance and durability.
Produces very good surface quality.
Can be profiled as desired, enabling optimal adjustment to the contour.

Recommendations for use

Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.
For the best performance, use with a recommended peripheral speed of 3,000-6,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Workpiece materials: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work

Compatible power tools: Angle grinder; Cordless angle grinder; Drive spindle

PFERDVALUE

PFERDERGONOMICS

recommends POLINOX® grinding discs to reduce vibration and noise produced during use and to improve comfort when working.

Downloads

POLINOX discs PNER

POLINOX® Unitized Disc, 5" x 1/2 x 7/8, T27, Fine, Soft, 2SF,Silicon carbide

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later