Power Tube Brush 5/8" Dia. .008 Brass Wire 5/32" Stem DS/DS

Technical information

Item number Global part number: 79183460
Dia. external: 5/8 Inch
Dia. filament material: .008 Inch
Dia. shank: 5/32 Inch
EDP no.: 83460
Filament material: Brass wire (MES)
Max. RPM: 2500 RPM
Mounting system: Shank
Overall length: 6 Inch
RPM, optimum, from: 500 RPM
RPM, optimum, to: 1500 RPM
Width: 2 Inch
Packaging unit: 10 pieces

Description

The high-performance tube brush is highly designed for deburring cross holes and for cleaning threads.

Brass wire filament brushes are designed for applications like surface finishing on copper or brass workpieces. Compared to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD uses wire quality CuZn37.

Brass wire is temperature-resistant up to 350°F.

Advantages

Long tool life due to high filament density and double spirals.
Low-sparking.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Safety notes

For safe use, guide the brush into the workpiece before beginning work.
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Brass; Copper; Other non-ferrous metals; Zinc

Applications: Cleaning; Deburring; Removing oxide layers

Compatible power tools: Flexible shaft drive; Manual application; Power drill

Downloads

Tube brushes crimped, smooth, double stem, double-spiral, shank-mounted

Power Tube Brush 5/8" Dia. .008 Brass Wire 5/32" Stem DS/DS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later