CELEBRATE 225 YEARS OF PFERD W/ AN EXCLUSIVE OFFER

Tube brushes crimped valve guide, shank-mounted

Valve Guide Brush 1/2" Dia. .010 Carbon Steel 2" Brush Length

EDP:
83470

Login / Register
Choose options
Dia. external
Dia. filament material
Filament material
Technical information
Valve Guide Brush 1/2" Dia. .010 Carbon Steel 2" Brush Length

Item number Global part number
79183470
Dia. external
1/2 Inch
Dia. filament material
.006 Inch
Dia. shank
1/4 Inch
EDP no.
83470
Filament material
Steel wire (ST)
Max. RPM
2500 RPM
Mounting system
Shank
Overall length
10 Inch
RPM, optimum, from
500 RPM
RPM, optimum, to
2500 RPM
Width
2 Inch
Packaging unit
10 pieces
Description

Brush for brushing valve guides. High brush stiffness for aggressive cleaning.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages
  • The metal sleeve construction enables stable operation without bending.
  • Includes knurled handle for manual use.
  • Long service life through use of PFERD special wire.
  • Creates fine surfaces.
Safety notes
  • For safe use, guide the brush into the workpiece before beginning work.
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Workpiece materials
Cast iron
Cast steel
Steel, cast steel
Steel materials with a hardness > 54 HRC
Steels up to 370 HV (< 38 HRC)
Thermoplastics
Thermosetting plastics
Wood
Applications
Cleaning
Deburring
Derusting
Paint stripping
Removing oxide layers
Roughening
Compatible power tools
Flexible shaft drive
Manual application
Power drill
Downloads