Chamfered Roughing End Mill, 4 flutes, 12mm Dia, 30mm APMX, 83mm OAL, Weldon shank, Universal

Technical information

Description

The solid carbide end mills are designed for universal use on a variety of materials.

Roughing end mills for various applications, from roughing through to finishing and ramping.

Weldon shank (HB) with flat notch in accordance with DIN 6535.

Advantages

Universal use on the most common materials.
High productivity due to optimum stock removal rate.
State-of-the-art coatings.
Neck chip channel.
Optimum chip control due to roughing cut.
Variable pitch and variable helix angle for low-vibration machining and smooth milling.

Recommendations for use

Workpiece materials: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Ductile cast iron; Ferrite (magnetic material); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Zinc

Downloads

Universal solid carbide end mill with four flutes UCR4, chamfer corner design with roughing cut