Wheel brushes crimped for burnishing machines, with hole

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive

EDP:: 81331

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive 2

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive 3

Technical data Change variant

Distributors-Search

Choose options

Dia. external

4 Inch

Dia. filament material

.008 Inch .050 Inch

Filament material

Stainless steel wire (INOX) Steel wire (LIT ST)

Reset Filter

Technical information

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive

Item number Global part number: 43509003
Dia. external: 4 Inch
Dia. filament material: .008 Inch
Dia. hole: 3/4 Inch
EDP no.: 81331
Filament material: Stainless steel wire (INOX)
Max. RPM: 6000 RPM
Mounting system: center hole
RPM, optimum: 2.400 - 3.900 RPM
Trim length: 1 Inch
Width: 4 Inch
Packaging unit: 1 piece

Description

Excellent for surface structuring work on large workpieces.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD TOOLS produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD TOOLS brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Can be used on all common burnishing machines due to keyed arbor hole.
Very corrosion-resistant.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Workpiece materials: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Compatible power tools: Drive spindle; Drum grinders

Downloads

Wheel brushes crimped for burnishing machines, with hole

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later