Wheel brushes crimped for power drills, universal, shank-mounted

M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank

EDP:: 763841

Technical data

Distributors-Search

Technical information

M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank

Item number Global part number: 43740002
Dia. external: 3 Inch
Dia. filament material: .040 Inch
Dia. shank: 1/4 Inch
EDP no.: 763841
Filament material: Silicon carbide (SiC)
Grit size: 120
Max. RPM: 4500 RPM
Mounting system: Shank
Packaging: POS packaging
RPM, optimum, from: 1500 RPM
RPM, optimum, to: 4500 RPM
Trim length: 3/4 Inch
Width: 3/8 Inch
Packaging unit: 5 pieces

Description

Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills.

Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement.

Plastic filaments are temperature-resistant up to 410°F.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Packaged for retail.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.
Use coolant for applications where large amounts of heat are produced.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Aluminum; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped for power drills, universal, shank-mounted

M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later