POLIVLIES® Surface Conditioning Belt, 18" x 1/4, 100 Grit, Coarse,Aluminum oxide

Technical information

Item number Global part number: 47201523
Abrasive: Aluminum oxide A
EDP no.: 43550
Grit size: 100 G
Length: 18 Inch
PFERD TOOLS type: VB 6/ 457 A100 G POA
Version: coarse, yellow-brown
Width: 1/4 Inch
Packaging unit: 10 pieces

Description

Designed for universal work on surfaces like metal tubes, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces.

Short belts are compatible with commonly available belt grinders.

Advantages

Cost-effective due to high abrasive performance and durability.
High tear strength with optimum flexibility.
Consistent work results due to high grain adhesion.

Recommendations for use

Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
For best performance, use at a recommended peripheral speed of 1,000-3,000 SFPM.

Safety notes

Follow all safety instructions for abrasive belt use.

Workpiece materials: Aluminum; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Compatible power tools: Belt grinder

Downloads

Short belts, non-woven type

POLIVLIES® Surface Conditioning Belt, 18" x 1/4, 100 Grit, Coarse,Aluminum oxide

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later