Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP

HICOAT® Carbide Bur SB-3 Cylindrical End Cut Double Cut 3/8" x 3/4" x 1/4" Shank

EDP:: 27082

HICOAT® Carbide Bur SB-3 Cylindrical End Cut Double Cut 3/8" x 3/4" x 1/4" Shank 2

Technical data

Distributors-Search

Technical information

HICOAT® Carbide Bur SB-3 Cylindrical End Cut Double Cut 3/8" x 3/4" x 1/4" Shank

Item number Global part number: 21727082
Cut: Double HC-FEP
Dia. external: 3/8 Inch
Dia. shank: 1/4 Inch
EDP no.: 27082
Length, cut: 3/4 Inch
Overall length: 2-1/2 Inch
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 8000 RPM
RPM from, steels up to 370 HV (38 HRC): 14000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 14000 RPM
RPM to, steels up to 370 HV (38 HRC): 24000 RPM
SCTI-No.: SB-3
Packaging unit: 1 piece

Description

Double cut burs with HICOAT® coating HC-FEP have a high hardness and wear resistance. The coating enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer service life and use at higher peripheral speeds compared to uncoated burs.

Cylindrical bur

Advantages

The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Workpiece materials: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Compatible power tools: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends HICOAT® coated burs for preventing fatigue, saving resources, and producing excellent work.

Downloads

Tungsten carbide burs for versatile use, Double cut, HI-COAT FEP

HICOAT® Carbide Bur SB-3 Cylindrical End Cut Double Cut 3/8" x 3/4" x 1/4" Shank

PFERDEFFICIENCY

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later