Wheel brushes knotted, COMBITWIST, INOX-TOTAL, with hole

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .014 SS 7/8" Arbor

EDP:: 82741

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .014 SS 7/8" Arbor 2

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .014 SS 7/8" Arbor 3

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .014 SS 7/8" Arbor 4

Technical data

Distributors-Search

Technical information

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .014 SS 7/8" Arbor

Item number Global part number: 43300042
Dia. external: 4 1/2 Inch
Dia. filament material: .014 Inch
Dia. hole: 7/8 Inch
EDP number: 82741
Filament material: Stainless steel wire (INOX)
Max. RPM: 12500 RPM
Mounting system: center hole
Number, knots: 24
Packaging: POS packaging
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 12500 RPM
Trim length: 7/8 Inch
Width: 1/2 Inch
Packaging unit: 1 piece

Description

Very aggressive brush. Suitable for heavy-duty brushing such as removal of heat discoloration, deburring, cleaning of weld seams and removal of adhesive residues and spatter.

In addition to brushes with a stainless steel filament, PFERD also offers brushes of the INOX-TOTAL type for work on stainless steel (INOX). It is particularly well suited to use in critical environments.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Maximum economic efficiency due to maximum service life and stock removal rate.
Brush runs smoothly due to it's flawless balance.
Designed for work on corners and edges as the knots are less likely to unravel.
Aggressive brushing action due to tightly-twisted wire knots.
Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A).
Very corrosion-resistant.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use on powerful variable speed angle grinders.

Workpiece materials: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing heat discolouration; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Compatible power tools: Angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDERGONOMICS

recommends the COMBITWIST® design to sustainably reduce the vibration produced during use and to improve comfort when working.

Downloads

Wheel brushes knotted, COMBITWIST, INOX-TOTAL, with hole

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .014 SS 7/8" Arbor

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later