Mounted Knot Wheel Brush 3-1/4" Dia. .020 Carbon Steel 1/4" Shank

Technical information

Mounted Knot Wheel Brush 3-1/4" Dia. .020 Carbon Steel 1/4" Shank

Item number Global part number: 79182947
Dia. external: 3 1/4 Inch
Dia. filament material: .020 Inch
Dia. shank: 1/4 Inch
EDP no.: 82947
Filament material: Steel wire (ST)
Max. RPM: 25000 RPM
Mounting system: Shank
Number, knots: 20
Overall length: 1 1/4
Packaging: Industrial packaging
RPM, optimum, from: 12500 RPM
RPM, optimum, to: 18700 RPM
Trim length: 3/4 Inch
Width: 1/2 Inch
Packaging unit: 10 pieces

Description

Aggressive brush for cleaning, derusting and work on weld seams.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Aggressive brushing action due to tightly-twisted wire knots.
Optimal access to hard-to-reach areas such as grooves and recesses.
Long service life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 500 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes knotted, shank-mounted

Mounted Knot Wheel Brush 3-1/4" Dia. .020 Carbon Steel 1/4" Shank

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later