ENJOY 7% OFF SELECT ORDERS OF $2,500+

TC burrs - PLAST cut

Advantages:

  • Particularly suitable for GRP and CRP with ≤ 40 % fibre content.
  • Minimizes delamination and fraying due to the special cut that is similar to PCD mills.
  • Particularly suitable for use on machines and on robots.
  • Very low cutting force.
  • High feed rates.
  • Reduced wear on the tool drive due to impact-free work without chatter marks, thanks to the high concentricity.

Materials that can be worked:

  • Plastics
  • Fibre-reinforced plastics (GRP/CRP) with a fibre content ≤ 40 %
  • Thermoplastics

Applications:

  • Trimming
  • Contour milling
  • Deburring
  • Milling grooves and pockets (with FSTS)
  • Drilling blind holes (with FSTS)
  • Drilling with minimal burr formation (with STS)
  • Milling out
  • Cutting out holes

Matching tool drives:

  • Flexible shaft drive
  • Straight grinder
  • Robot
  • Machine tools

Recommendations for use:

  • The version with a drill cut (BS) is particularly suitable for machine and robot applications, while the version with a centre drill (ZBS) is used for manual applications. It allows secure drilling on almost all surface conditions.
  • The versions with an end cut (two teeth, STS) and flat end cut (two teeth, FSTS) are suitable only for machine and robot applications.
  • Select a burr diameter greater than the thickness of the material to be machined, to avoid impacts and chattering with the risk of damaging or breaking the tool.
  • Increase the rotational speed if the tool tends to chatter.
  • If necessary, reduce the rotational speed and contact pressure if melting occurs.
  • If possible, use the tools on powerful drives with elastically mounted spindles to avoid vibration.
  • For the cost-effective use of burrs, work with higher rotational/cutting speeds.
  • Power recommendation for tool drives:
    • Shank diameter of 3 mm: 75 to 300 watts
    • Shank diameter of 6 mm: from 300 watts
  • Please observe the rotational speed recommendations.

Stay in touch!

Sign up to receive our latest email newsletters and updates about products, services, and promotions. Privacy Policy